SHOP MANUALSHOP MANUAL
FRONT WAGON
Ch 7 Page 24 Ch 7 Page 25
FRONT WAGON
Articulation Hinge Bolts
Articulation
Hinge Upper
Bolt
Securing
Plate
Shim
Articulation
Hinge Lower
Bolt
7.3.4 Articulation Hinge
To measure the wear on the articulation hinge, place the truck on level ground, with front and rear frame in line.
Place a hydraulic jack under centre of lower articulation hinge bolt according to Fig 27.
Lift with a force of 1800 kp, and read the dial indicator.
Acceptable value max. 0.0XXmm
Removal
Separate the front wagon and the rear wagon. (Ref. 7.3.1)
Disconnect the steering cylinders from the articulation hinge, by removing the front pivot bolts (Ref. 5.3.9)
Release articulation lock (Ref. Operation & Maintenance Manual 2.24)
Place pallets and a pallet jack under the articulation bearing and hinge.
Disconnect hinge bolts lubrication lines.
Be aware of the risk of injury to people and equipment when handling heavy objects!
WARNING
Figure 51
To Next Page
Loading...