SHOP MANUAL
DRIVE LINE
Ch 3 page 144 Ch 3 page 145
DRIVE LINE
Assemble screws for the axle housing to the frame.
Screw dimension: M24 x 380mm
Apply locking liquid: Tree Bond 1374
Torque limit: 935 Nm.
Make sure that the guide pin meet the hole in the frame.
Assemble the tandem housing unit to the rear
Assemble the propeller shaft to the flange
of the differential.
Apply locking liquid: Tree Bond 1374
Assemble the tandem housing to the rear frame.
Lift the rear wagon with the crane.
Move the tandemhousing unit under the rear frame and connect
the frame and axle housing.
Figure 444
Figure 443
Figure 442
Figure 441
To Next Page
Loading...