SHOP MANUAL
DRIVE LINE
Ch 3 page 78 Ch 3 page 79
DRIVE LINE
Disassemble the differentilal from the axle hous-
ing
On both side of the boggi unit, disassemble screws
from the cover for the shaft and pinion
The safest way to disassemble the differential is when the
bogie unit is separated from the rear frame. It’s also possible
when using these next pages description:
Drain the oil from axle housing.
Secure the machine with wheel chocks on the front
wheel.
DANGER
NOTE
Draining oil from tandem housing is not necessary if removal
takes place just for work on the tandem bearing.
NOTE
Figure 204
Figure 203
Figure 202
To Next Page
Loading...