SHOP MANUAL
DRIVE LINE
Ch 3 page 144 Ch 3 page 145
DRIVE LINE
Fit wheels and assemble wheel nuts
20 pcs Width across flat: 30 mm
Lift the tandem unit and remove safety supports under the axle
housing.
Be sure that the tandem unit is properly assembled
and it is safe to lower from stand.
Move tandem housing in positon and assemble it to the differen-
tial adapter.
Apply loctite no.?
Be aware of personal injury.
Figure 440
Figure 439
Figure 438
Figure 437
WARNING
To Next Page
Loading...