Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 261
Confidential
3.4.11.5 Front Cover
1. Remove the Color Measurement Device. (p255)
2. Remove the Mounter. (p132)
3. Open the Front Cover slightly, and disengage the joint on the center.
Figure 3-201. Disengaging the joint
4. Bend the Front Cover in the middle, and release the hinges on both sides.
5. Remove the Front Cover.
Figure 3-202. Removing the Front Cover
Front Cover
Joint
Front Cover
Hinge
Hinge
Hinge
To Next Page
Loading...
Need help?
General