Hioki 8841 - Page 5

5.4.2 Setting the Channel Screen 79
5.4.3 Setting the Display Screen
80
5.5 Settings on the Waveform Display Screen (REC) 81
5.6 Start and Stop Operation (REC)
82
Chapter 6 RMS Recorder Function 83
6.1 Overview of the RMS Recorder Function 83
6.2 Operation Sequence (RMS) 84
6.3 STATUS Settings (RMS)
86
6.3.1 Setting the Function Mode 87
6.3.2 Setting the Time Axis Range 87
6.3.3 Setting the Frequency
88
6.3.4 Setting the Recording Length
88
6.3.5 Setting the Display Layout 89
6.3.6 Setting the Print Mode 91
6.3.7 Setting the Additional Recording Function 92
6.3.8 Setting the Printer Function (Real Time Printing)
93
6.3.9 Setting the Auto Save Function
93
6.4 Settings on the Waveform Display Screen (RMS) 95
6.5 Start and Stop Operation (RMS)
96
Chapter 7 Recorder & Memory Function 97
7.1 Overview of the Recorder & Memory Function 97
7.2 Operation Sequence (REC&MEM)
98
7.3 STATUS Settings (REC&MEM)
100
7.3.1 Setting the Function Mode 101
7.3.2 Setting the Time Axis Range 102
7.3.3 Setting the Recording Length
103
7.3.4 Display Function
104
7.3.5 Setting the Display Layout 105
7.3.6 Setting the Print Mode 106
7.3.7 Setting the Additional Recording Function 107
7.3.8 Setting the Printer Function (Real-time Printing)
108
7.3.9 Setting the Auto Save Function
109
7.3.10 Setting the Real-Time Save 111
7.4 Settings on the Waveform Display Screen (REC&
MEM)
117
7.5 Start and Stop Operation (REC&MEM)
118