Chapter 4. Basic configuration 69
Draft Document for Review August 30, 2007 12:59 am 7065DS3KBasicConfig.fm
Figure 4-30 Specify HBA Host Ports
Figure 4-31 displays. You can now enter the HBA host port identifier and an alias to allow it to
be identified. As we are using a FC HBA, this will be the WWN of FC HBA port 0.
Figure 4-31 Enter New HBA Host Port
Click Add to complete the HBA host port definition and then repeat the same steps for the
second HBA host port. When this is complete, both host port identifiers should be visible in
the window, as shown in Figure 4-32.
To Next Page
Loading...
Need help?
General