Chapter 10. Administration - Modify 215
Draft Document for Review August 30, 2007 12:59 am 7065Admin_Modify.fm
10.2 Modify Host Configuration
Click the Edit Topology link in the Modify tab to access functions to change your host
configuration, including hosts, host groups and host ports.
10.2.1 Edit Topology
Figure 10-2 on page 215 shows the main panel.
Figure 10-2 Modify - Edit Topology
The host topology item displays the current host configuration, including all host groups, hosts
and their associated WWNs. On the right side are the following buttons for the possible
configuration changes. The list of valid buttons depends on your selection from the Host
topology view.
Move
Rename
Remove
Add HBA
Replace HBA
Host Type
Move
The Move Button is active when you highlight either a host (Figure 10-3), or an HBA.
Move host
If you highlight a host (either a single host or a member of a host group), you can:
move hosts to an existing host group
move hosts from one host group to the other
To Next Page
Loading...
