© Copyright IBM Corp. 2007. All rights reserved. 441
Draft Document for Review August 30, 2007 12:59 am 7065FC_Config1.fm
Chapter 19. FC configuration 1 - Emulex HBA
boot BladeServer from SAN
This chapter covers a sample configuration describing how to boot a BladeServer with an
Emulex HBA, from a DS3400. For this example we use two FC Switches, directly attached to
the DS3400. Before you start, make sure that all the firmware on the storage subsystem and
on the host is flashed to the latest level, as described in 13.1.4, “Download Firmware” on
page 295.
19
To Next Page
Loading...
Need help?
General