Chapter 4. Basic configuration 57
Draft Document for Review August 30, 2007 12:59 am 7065DS3KBasicConfig.fm
Figure 4-16 Installing DS3000 Storage Manager
11.When finished, the Install Complete window appears. Click Done to exit the installation
utility. Host server components installation requires that the host server is now restarted.
The DS3000 Storage Manager is installed and ready for use. To start Storage Manager,
select Start → All Programs → Storage Manager 2 Client → Storage Manager 2 Client.
4.3 Add a DS3000 subsystem in Storage Manager
Right after the installation, the Storage Manager will be unconfigured, since no DS3000
subsystems have been defined in the Enterprise Management Window. Therefore, you will be
prompted to add a storage subsystem.
1. The
Select Addition Method window appears, as shown in Figure 4-17.
To Next Page
Loading...
Need help?
General