7065InstallSM.fm Draft Document for Review August 30, 2007 12:59 am
100 IBM System Storage DS3000: Introduction and Implementation Guide
Figure 5-12 Install complete
5.2 Install Storage Manager on Linux
Installing Storage Manager on Linux is similar to Windows, with one major difference. The
failover driver known as RDAC is not included in the Storage Manager Linux installation
package - it must be installed separately from the Storage Manager package.
Storage Manager on Linux can be installed using a GUI or a text-based interface. Both
installation variants are described here. The first steps are common to all methods.
– 5.2.1, “Prepare for install” on page 100
– 5.2.2, “Installing or upgrading Storage Manager using the GUI” on page 101
– 5.2.3, “Install Storage Manager using a text console” on page 106
5.2.1 Prepare for install
1. Download the latest version of the DS3000 Storage Manager Client to the management
station or host connected to the DS3000. See Appendix B, “IBM Support Web site” on
page 533 for how to get downloads from the IBM Support site.
2. Extract the archive to a local directory, as shown in Example 5-1
Example 5-1 Extract package archive
amazon:/IBM # tar xvfz ibm_sw_ds3k_0217b505_linux2.6_anycpu.tar.gz
SM2MIB/README_First.txt
SM2MIB/SM2.MIB
ibm_sw_ds3k_0217B505_linux2.6_anycpu.txt
ibm_sw_ds3k_0217B505_linux2.6_anycpu.chg
SMIA-LINUX26-02.17.B5.05.bin
amazon:/IBM #
3. The following files are unpacked. These include:
– installation package and executable
– readme file that describes the package
To Next Page
Loading...
Need help?
General