7065Admin_Configure.fm Draft Document for Review August 30, 2007 12:59 am
142 IBM System Storage DS3000: Introduction and Implementation Guide
Figure 8-13 SAS Address
4. Record the SAS address and host. Repeat for any other SAS HBAs. Press Esc to exit the
SAS HBA BIOS.
8.2 Configure hosts
In 8.1.2, “Preparations on the host server” on page 136, you have recorded the WWN of your
host server HBAs. You will use this to set up and configure your DS3000.
In the first part of the Configure Tab (Figure 8-14) you can:
Configure Host Access (Automatic)
Configure Host Access (Manual)
Create Host Groups
To Next Page
Loading...
Need help?
General