Chapter 16. iSCSI configuration 1 - Windows 2003 with QLogic QMC4052 HBA 359
Draft Document for Review August 30, 2007 12:59 am 7065iSCSI_Config1.fm
Figure 16-30 SANsurfer - HBA utilities
9. A firmware download warning appears (Figure 16-31) about actions that need to be done
before the update can be performed. At this stage of the setup no further actions are
required, so click Yes.
Figure 16-31 SANsurfer - Firmware download warning
10.Select the adapter firmware update file from the location where it was extracted to in step
2 on page 357. Click Save. See Figure 16-32 on page 360.
To Next Page
Loading...
