Chapter 10. Administration - Modify 237
Draft Document for Review August 30, 2007 12:59 am 7065Admin_Modify.fm
2. The Re-Copy window will open (Figure 10-36). Review the information, select a copy
priority and ype yes to confirm that you want to perform this operation. Click OK to start.
Figure 10-36 Logical Drive Copies - Re-Copy
3. The Re-Copy process will start immediately.
Stopping VolumeCopy
This option in the Copy Manager is used to stop a VolumeCopy with a status of In Progress,
Pending, or Failed.
To stop a VolumeCopy:
1. Highlight a Logical Drive Copy and click Stop.
2. The Stop Copy window will appear (Figure 10-37 on page 238).
Note: Using this option on a VolumeCopy with a status of Failed clears the
Needs-Attention condition on a storage system.
To Next Page
Loading...
