7065FC_Config3.fm Draft Document for Review August 30, 2007 12:59 am
512 IBM System Storage DS3000: Introduction and Implementation Guide
The task starts on the DS3400, as indicated in Figure 21-22. Click OK to return to the
subsystem management window.
Figure 21-22 Change Logical Drive Ownership/Preferred Path - Started
We now have a logical drive available and assigned to our host server. The logical drive is
owned by controller A, so we can proceed to the next section.
21.5 Configure logical drive as boot device
We will now use Fast!UTIL to specify that our logical drive is the bootable device. Reboot the
host server and press <Ctrl-Q> when prompted to launch Fast!UTIL.
1. Select the first FC HBA port and then Configuration Settings → Selectable Boot
Settings. This is shown in Figure 21-23.
To Next Page
Loading...
Need help?
General