Chapter 16. iSCSI configuration 1 - Windows 2003 with QLogic QMC4052 HBA 357
Draft Document for Review August 30, 2007 12:59 am 7065iSCSI_Config1.fm
you need to first create a bootable DOS floppy disk, since the bootable image is not provided
with the code download.
Updating the code using SANsurfer can be done using the code files directly, as we will show
in this section. The update package contains a readme file that describes in detail how to
perform the update under DOS.
1. Download the BIOS and firmware files from
http://support.qlogic.com/support/oem_detail_all.asp?oemid=369.
At the time of writing, the latest BIOS was v1.09, and the HBA firmware was V2.00.00.45
2. Unpack both downloaded archives into a local directory on the host running the SANsurfer
GUI. As well as the readmes and release notes, you should see files similar to:
ql4022rm.BIN Adapter BIOS
qla4022.dl Adapter firmware
3. Start SANsurfer. Select the HBA to be updated from the iSCSI HBA listing and click the
HBA options tab, as in Figure 16-25.
Figure 16-25 SANsurfer - HBA utilities
4. In HBA Utilities on the HBA options tab click Select BIOS to Download. Select the
adapter BIOS update file from its extracted location in step 2 on page 357 and click Save.
See Figure 16-26 on page 357.
Figure 16-26 SANsurfer - Download BIOS
To Next Page
Loading...
Need help?
General