Chapter 16. iSCSI configuration 1 - Windows 2003 with QLogic QMC4052 HBA 345
Draft Document for Review August 30, 2007 12:59 am 7065iSCSI_Config1.fm
Figure 16-3 QLogic iSCSI Expansion Card downloadable drivers
To prevent unknown devices from being left in Device Manager, the Storage only driver
installs a Null driver for the Ethernet Controllers. These controllers will then appear as System
devices after the driver package is installed, as shown in Figure 16-8 on page 347.
16.3.2 Install the driver
1. Download the driver for the iSCS HBA from
http://support.qlogic.com/support/oem_detail_all.asp?oemid=369 and extract the
archive into a local directory. Be sure that the STOR miniport driver is used and not the
SCSI miniport driver.
2. Right click on the first Network Controller in Device Manager and select Update Driver....
from the context menu, as in Figure 16-4.
Figure 16-4 Device Manager - Update driver
3. Select Install from a list or specific location (Advanced) and click Next. See
Figure 16-5.
To Next Page
Loading...
Need help?
General