Chapter 8. Administration - Configure 137
Draft Document for Review August 30, 2007 12:59 am 7065Admin_Configure.fm
FC QLogic HBAs
1. To enter the QLogic HBA BIOS (called Fast!UTIL) enter Ctrl + Q when prompted.
(Figure 8-1).
Figure 8-1 Enter QLogic BIOS
2. A screen similar to Figure 8-2 displays, listing the adapters found. Choose one and press
Enter to load the ports menu.
Figure 8-2 QLogic - Select Adapter
3. Figure 8-3 on page 138 shows the ports menu displayed when you select an adapter.
Tip: If you are using an IBM System x Server, to enable ROM Control Execution, enter
the System BIOS (F1) and select Advanced Setup → PCI Bus Control → PCI
Control Execution.
To Next Page
Loading...
