7065SAS_Config1.fm Draft Document for Review August 30, 2007 12:59 am
328 IBM System Storage DS3000: Introduction and Implementation Guide
Figure 14-13 Select a host server
2. Select the logical drives which will be mapped to our host. In our case, we highlight logical
drive 1 and assign LUN 0 to it, as shown in Figure 14-14.
Figure 14-14 Select logical drives
Click Finish to complete the process.
3. You will see the progress bar while the operation takes place. Click OK in the progress
window to display the completion window (see Figure 14-15).
To Next Page
Loading...
Need help?
General