Chapter 16. iSCSI configuration 1 - Windows 2003 with QLogic QMC4052 HBA 347
Draft Document for Review August 30, 2007 12:59 am 7065iSCSI_Config1.fm
Figure 16-7 Device Manager - Installed QLogic iSCSI Adapter
8. The NULL driver for the Ethernet controller is installed in the same way - repeat step 2 on
page 345 to 5 on page 346 for both Ethernet Controllers in Device Manager. You will then
see the two Ethernet Controllers listed under System Devices (QLogic NULL Driver) as in
Figure 16-8 on page 347.
Figure 16-8 Device Manager with QLogic NULL Driver
Driver installation is now complete - we now install the HBA management application to
configure the iSCSI HBA.
To Next Page
Loading...
Need help?
General