7065FC_Config1.fm Draft Document for Review August 30, 2007 12:59 am
450 IBM System Storage DS3000: Introduction and Implementation Guide
Figure 19-13 Emulex BIOS - Configure This Adapter’s Parameter
s
3. Type 1 and press Enter to “Enable or Disable BIOS”. In Figure 19-14 you can see the
BIOS is currently disabled.
Figure 19-14 Emulex BIOS - Enable Adapter BIOS
4. Press 1 and Enter again to enable the BIOS. You can see in Figure 19-15 on page 451
that the BIOS is now enabled.
To Next Page
Loading...
Need help?
General