Chapter 3. Cabling 39
Draft Document for Review August 30, 2007 12:59 am 7065Cabling.fm
Figure 3-7 Two host servers attached to dual controller DS3400
Switch-attached DS3400
As the DS3400 subsystem can support many more than two host servers, let’s consider a
larger configuration. For more than two servers, a SAN switch is required. Figure 3-8 displays
a sample configuration with four host servers attached to a dual controller DS3400. Each host
has two FC HBAs for redundant I/O path support.
Host server 1
Host server 2
DS3400
To Next Page
Loading...
