7065DS3KBasicConfig.fm Draft Document for Review August 30, 2007 12:59 am
66 IBM System Storage DS3000: Introduction and Implementation Guide
Figure 4-27 Verifying the host and host ports
What hosts are discovered?
For a host server to be automatically discovered:
The DS3000 Storage Manager host software components must be installed on the server.
The SMagent service must be up and running.
The host server can communicate with the access logical drive.
On a Windows host server, you can easily verify that SMagent is running in the Application
Event Log. Check the last two SMagent events. The last event will state whether the SMagent
service is running. The next to last event will display the access logical drives that are
detected by the SMagent (see Figure 4-28).
To Next Page
Loading...
Need help?
General