CHAPTER56 Viewing Network Status
Mediant 1000 Gateway & E-SBC | User's Manual
56 Viewing Network Status
This section describes how to view network-related status.
Viewing Active IP Interfaces
You can view the device's active IP interfaces that are configured in the IP Interfaces table (see
Configuring IP Network Interfaces).
➢ To view active IP network interfaces:
■ Open the IP Interface Status page (Monitor menu > Monitor tab > Network Status folder >
IP Interface Status).
Viewing Ethernet Device Status
You can view the status of configured Ethernet Devices that have been successfully applied. To
configure Ethernet Devices, see Configuring Underlying Ethernet Devices.
➢ To view Ethernet Device status:
■ Open the Ethernet Device Status page (Monitor menu > Monitor tab > Network Status folder
> Ethernet Device Status).
Viewing Ethernet Port Information
You can view status information of the device's Ethernet ports. To configure Ethernet ports, see
Configuring Underlying Ethernet Devices.
➢ To view Ethernet port information:
■ Open the Ethernet Port Information table, by doing one of the following:
● Navigation tree: Monitor menu > Monitor tab > Network Status folder > Ethernet Port
Information.
● Monitor home page: Click an Ethernet port on the graphical display of the device (see
Viewing Device Status on Monitor Page).
Table 56-1: Ethernet Port Information Table Description
Parameter Description
Port Name Displays the name of the port.
- 963 -
To Next Page
Loading...
Need help?
General
