AudioCodes E-SBC User Manual

CHAPTER26 Manipulation
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
✔ Network-PSTN Specific
✔ Subscriber-Level0 Regional
✔ Abbreviated
For more information on available NPI/TON values, see
Numbering Plans and Type of Number.
Note: The parameter is applicable only to digital interfaces.
'NPI'
npi
[_NumberPlan]
Defines the Numbering Plan Indicator (NPI).
■ [-1] Not Configured = (Default) Value received from
PSTN/IP is used
■ [0] Unknown
■ [1] E.164 Public
■ [9] Private
For more information on available NPI/TON values, see
Numbering Plans and Type of Number.
Note: The parameter is applicable only to digital interfaces.
'Presentation'
is-presentation-
restricted
[_
IsPresentationRestricted]
Enables caller ID.
■ Not Configured = Privacy is determined according to the
Caller ID table (see Configuring Caller Display Information).
This option is applicable only to analog interfaces.
■ [0] Allowed = Sends Caller ID information when a call is
made using these destination / source prefixes.
■ [1] Restricted = Restricts Caller ID information for these
prefixes.
Note: If you configure the parameter to Restricted and the
'AssertedIdMode' parameter to Add P-Asserted-Identity, the
From header in the INVITE message includes the following:
From: 'anonymous' <sip:
anonymous@anonymous.invalid> and 'privacy: id'
header.
Manipulating Redirected and Diverted Numbers for Call
Diversion
You can configure manipulation rules to manipulate the Diverted-to and Diverting numbers received
in the incoming Call Redirection Facility message for call diversion, which is interworked to
outgoing SIP 302 responses.
This feature is applicable only to the Gateway application - Euro ISDN and QSIG
variants in the IP-to-Tel call direction.
- 627 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English