EasyManuals Logo

AudioCodes E-SBC User Manual

AudioCodes E-SBC
1414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1184 background imageLoading...
Page #1184 background image
CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
'Secondary Server IP'
configure network > ocsp > secondary-
server-ip
[OCSPSecondaryServerIP]
Defines the IP address (in dotted-
decimal notation) of the secondary
OCSP server (optional).
The default IP address is 0.0.0.0.
'Server Port'
configure network > ocsp > server-port
[OCSPServerPort]
Defines the OCSP server's TCP
port number.
The default port number is 2560.
'Default Response When Server Unreachable'
configure network > ocsp > default-
response
[OCSPDefaultResponse]
Determines whether the device
allows or rejects peer certificates
when the OCSP server cannot be
contacted.
â–  [0] Reject (default)
â–  [1] Allow
Proxy, Registration and Authentication Parameters
The proxy server, registration and authentication SIP parameters are described in the table below.
Table 68-28:Proxy, Registration and Authentication SIP Parameters
Parameter Description
'Use Default Proxy'
configure voip > sip-
definition proxy-and-
registration > enable-
proxy
[IsProxyUsed]
Enables the use of Proxy Set ID 0 (for backward
compatibility).
â–  [0] No = (Default) Proxy Set 0 is not used.
â–  [1] Yes = Proxy Set ID 0 is used.
Note:
â–  The parameter must be used only for backward
compatibility. If not required for backward
compatibility, make sure that the parameter is
disabled and use the Proxy Sets table for
configuring all your Proxy Sets (except for Proxy
Set #0).
â–  If you are not using a proxy server, you must
configure routing rules to route the call.
â–  The parameter is applicable only to the Gateway
application.
'Proxy Name'
configure voip > sip-
definition proxy-and-
registration > proxy-name
[ProxyName]
Defines the Home Proxy domain name. If specified,
this name is used as the Request-URI in REGISTER,
INVITE and other SIP messages, and as the host part
of the To header in INVITE messages. If not specified,
the Proxy IP address is used instead.
The valid value is a string of up to 49 characters.
Note: The parameter functions together with the
UseProxyIPasHost parameter.
- 1146 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes E-SBC and is the answer not in the manual?

AudioCodes E-SBC Specifications

General IconGeneral
BrandAudioCodes
ModelE-SBC
CategoryGateway
LanguageEnglish

Related product manuals