AudioCodes E-SBC User Manual

CHAPTER25 Routing
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
You can use special patterns (notations) to denote the
number. For example, if you want to match this rule to user
parts whose last four digits (i.e., suffix) are 4 followed by any
three digits (e.g., 4008), then configure this parameter to "
(4xxx)". As another example, the pattern "[100-199]
(100,101,105)" denotes a number that starts with 100 to 199
and ends with 100, 101 or 105. To denote any number, use
the asterisk (*) symbol (default). To denote calls without a
called number, use the dollar ($) sign. For available patterns,
see Dialing Plan Notation for Routing and Manipulation
Tables.
The number can include up to 50 digits.
Note:
■ For LDAP-based routing, enter the LDAP query keyword
as the prefix number to denote the IP domain:
✔ "PRIVATE" = Private number
✔ "OCS" = Skype for Business / OCS client number
✔ "PBX" = PBX / IP PBX number
✔ "MOBILE" = Mobile number
✔ "LDAP_ERR" = LDAP query failure
For more information, see AD-based Routing for
Microsoft Skype for Business.
■ If you want to configure re-routing of ISDN Tel-to-IP calls
to fax destinations, enter the value string "FAX" (case-
sensitive) as the destination phone prefix. For more
information, see the FaxReroutingMode parameter.
'Destination Tags'
dest-tags
[Prefix_DestTags]
Assigns a Dial Plan tag to denote a group of users by called
(destination) number prefixes and/or suffixes.
The valid value is a string of up to 20 characters. The tag is
case insensitive.
To configure Dial Plan tags, see Configuring Dial Plans.
Note:
■ The tag must belong to the Dial Plan that is assigned for
IP-to-Tel routing. To do this, use the 'Tel-to-IP Dial Plan
Name' (Tel2IPDialPlanName) parameter.
■ The device uses the tag before or after manipulation,
depending on the 'Tel To IP Routing Mode'
(RouteModeTel2IP) parameter. If configured to Route
calls before manipulation, the tag is used before
manipulation. If configured to Route calls after
manipulation, the tag is used after manipulation.
Action
'Destination IP Group'
dst-ip-group-id
[PREFIX_
DestIPGroupName]
Assigns an IP Group to where you want to route the call. The
SIP INVITE message is sent to the IP address configured for
the Proxy Set that is associated with the IP Group.
Note:
- 588 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English