CHAPTER44 Loading Auxiliary Files
Mediant 1000 Gateway & E-SBC | User's Manual
2. Click the Browse button corresponding to the Auxiliary file type that you want to load, navigate
to the folder in which the file is located, and then click Open; the name of the file appears next
to the Browse button.
3. Click the corresponding Load File button.
4. Repeat steps 2 through 3 for each file you want to load.
5. Reset the device with a save-to-flash for your settings to take effect (if you have loaded a Call
Progress Tones file).
Loading Auxiliary Files through CLI
You can load Auxiliary files from remote servers through CLI:
â– Single Auxiliary file:
# copy <file> from <URL of remote server>
For example:
# copy call_progress_tones from http://192.169.11.11:80/cpt_us.dat
- 861 -
To Next Page
Loading...
Need help?
General
