CHAPTER6 Web-Based Management
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
â– Only Control- and/or Media-type IP network
interfaces can be associated with additional
management interfaces.
â– An IP network interface can be associated with only
one additional management interface.
'TLS Context Name'
tls-context-name
[AdditionalManagementInterfaces_
TLSContextName]
Assigns a TLS Context (from the TLS Contexts table) to
the management interface. A TLS Context provides
secure TLS-based management access.
For more information on TLS Contexts, see Configuring
TLS Certificate Contexts.
'HTTPS Only'
https-only-val
[AdditionalManagementInterfaces_
HTTPSOnly]
Defines the protocol required for accessing the
management interface.
â– [0] HTTP and HTTPS = The management interface
can be accessed over a secured (HTTPS) and an
unsecured (HTTP) connection.
â– [1] HTTPS Only = The management interface can
be accessed only over a secured (HTTPS)
connection.
â– [2] Use global definition = The type of
management connection (HTTP and HTTPS, or
HTTPS Only) depends on the configuration of the
global parameter, HTTPSOnly (see Configuring
Secured (HTTPS) Web).
Configuring Management User Accounts
The Local Users table lets you configure up to 20 management user accounts for the device's Web
interface and CLI. You configure each user account with login credentials (username and
password) and a management user level which defines the level of read and write privileges. The
table below describes the different types of user levels:
Table 6-6: Description of Management User Levels
User Level
Numeric
Representation
in RADIUS
Privileges
Security
Administrator
200 Read-write privileges for all Web pages. This user level
can also access the CLI's Privileged mode.
This user level can create all other user levels and is the
only one that can create the first Master user.
Note: At least one Security Administrator user must exist.
Master 220 Read-write privileges for all Web pages. This user level
can also access the CLI's Privileged mode.
This user level can create all user levels, including
additional Master users and Security Administrators. It
can delete all users except the last Security Administrator.
- 42 -