AudioCodes E-SBC User Manual

CHAPTER47 Automatic Provisioning
Mediant 1000 Gateway & E-SBC | User's Manual
File Type
Keywords for
Template File
Value Replacing
<FILE> Placeholder
Call Progress Tone (CPT) file cpt cpt.dat
Prerecorded Tones (PRT) file prt prt.dat
CAS file cas cas.dat
Dial Plan file dpln dialPlan.dat
Answering Machine Detection
(AMD) file
amd amd.dat
SSL/TLS Private Key file sslp pkey.pem
pkey<ID>.pem (for multi-
certificate system)
SSL/TLS Root Certificate file sslr root.pem
root<ID>.pem (for multi-certificate
system)
SSL/TLS Certificate file sslc cert.pem
cert<ID>.pem (for multi-certificate
system)
Triggers for Automatic Update
The Automatic Update feature can be triggered by the following:
■ Upon device startup (reset or power up). To disable this trigger, run the following CLI
command:
(config-system)# automatic-update
(automatic-update)# run-on-reboot off
■ Periodically:
● Specified time of day (e.g., 18:00), configured by the ini file parameter
AutoUpdatePredefinedTime or CLI command configure system > automatic-update >
predefined-time.
● Interval between Automatic Updates (e.g., every 60 minutes), configured by the ini file
parameter AutoUpdateFrequency or CLI command configure system > automatic-update
> update-frequency.
■ Centralized provisioning server request:
● Upon receipt of an SNMP request from the provisioning server.
● Upon receipt of a special SIP NOTIFY message from the provisioning server. The
NOTIFY message includes an Event header with the AudioCodes proprietary value,
"check-sync;reboot=false", as shown in the example below:
NOTIFY sip:<user>@<dsthost> SIP/2.0
To: sip:<user>@<dsthost>
From: sip:sipsak@<srchost>
CSeq: 10 NOTIFY
- 896 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English