AudioCodes E-SBC User Manual

CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
[UserProductName] Defines a name for the device instead of the default
name.
The value can be a string of up to 29 characters.
For more information, see Customizing the Product
Name.
Note: To enable customization of the device name,
see the UseProductName parameter.
[UseWebLogo] Defines whether the Web interface displays a logo
image or text.
■ [0] = (Default) The Web interface displays a logo
image, configured by the LogoFileName
parameter.
■ [1] = The Web interface displays text,
configured by the WebLogoText parameter.
For more information, see Replacing the Corporate
Logo.
[WebLogoText] Defines the text that is displayed instead of the logo
in the Web interface.
The valid value is a string of up to 15 characters.
For more information, see Replacing the Corporate
Logo with Text.
Note: The parameter is applicable only when the
UseWebLogo parameter is configured to 1.
[LogoFileName] Defines the name of the image file that you want
loaded to the device. This image is displayed as the
logo in the Web interface (instead of the
AudioCodes logo).
The file name can be up to 47 characters.
For more information, see Replacing the Corporate
Logo with an Image.
Notes:
■ The image file type can be one of the following:
GIF, PNG, JPG, or JPEG.
■ The size of the image file can be up to 64
Kbytes.
■ The parameter is applicable only when the
UseWebLogo parameter is configured to 0.
Telnet and CLI Parameters
The Telnet parameters are described in the table below.
Table 68-3: Telnet Parameters
Parameter Description
'Embedded Telnet Server' Enables the device's embedded Telnet server.
- 1096 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English