CHAPTER6 Web-Based Management
Mediant 1000 Gateway & E-SBC | User's Manual
➢ To log off the Web interface:
1. On the menu bar, from the 'Admin' drop-down list, click Log Out; the following confirmation
message box appears:
2. Click Yes; you are logged off the Web session and the Web Login window appears enabling
you to re-login, if required.
Customizing the Web Interface
You can customize the following elements of the device's Web interface (GUI):
■ Corporate logo (see Replacing the Corporate Logo)
■ Device's (product) name (see Customizing the Product Name)
■ Web browser tab label (see Customizing the Browser Tab Label on page37)
■ Web browser Favicon (see Customizing the Favicon)
■ Login welcome message (see Creating a Login Welcome Message)
● The product name also affects other management interfaces.
● In addition to Web-interface customization, you can customize the following to
reference your company instead of AudioCodes:
✔ SNMP Interface: Product system OID (see the SNMPSysOid parameter) and
trap Enterprise OID (see the SNMPTrapEnterpriseOid parameter).
✔ SIP Messages: User-Agent header (see the UserAgentDisplayInfo
parameter), SDP "o" line (see the SIPSDPSessionOwner parameter), and
Subject header (see the SIPSubject parameter).
Replacing the Corporate Logo
You can replace the default corporate logo image (i.e., AudioCodes logo) that is displayed in the
Web interface. The logo appears in the following Web areas:
■ Web Login screen:
■ Menu bar:
- 35 -