AudioCodes E-SBC - Quality of Service Parameters

CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
[OSNAccessVlan]
'Block OSN Port'
configure
system >
interface osn
> shutdown
[OSNBlockPort]
Enables or disables the Ethernet port of the internal switch that
interfaces with the OSN.
■ [0] Enable (default)
■ [1] Disable
configure
network >
network-
settings >
osn-internal-
vlan
[OSNInternalVLAN]
Enables a single management platform when the device is deployed as
a Survivable Branch Appliance (SBA) in a Microsoft Skype for Business
environment. It allows configuration and monitoring of the
Gateway/SBC device through the SBA Management Interface.
■ [0] = Disable (default)
■ [1] = Enable
For more information, refer to the SBA Installation and Maintenance
Manual.
Quality of Service Parameters
The Quality of Service (QoS) parameters are described in the table below.
Table 68-13:QoS Parameters
Parameter Description
Layer-2 Class Of Service (CoS) Parameters (VLAN Tag Priority Field)
Layer-3 Class of Service (TOS/DiffServ) Parameters
CLI path: configure network > qos application-mapping
'Media Premium QoS'
media-qos
[PremiumServiceClassMediaDiffServ]
Global parameter defining the DiffServ value for
Premium Media CoS content.
You can also configure this feature per specific
calls, using IP Profiles (IpProfile_IPDiffServ) or
Tel Profiles (TelProfile_IPDiffServ). For a detailed
description of the parameter and To configure the
feature, see Configuring IP Profiles or Configuring
Tel Profiles.
Note: If the feature is configured for a specific
profile, the settings of this global parameter is
ignored for calls associated with the profile.
'Control Premium QoS'
control-qos
[PremiumServiceClassControlDiffServ]
Global parameter defining the DiffServ value for
Premium Control CoS content (Call Control
applications).
You can also configure the feature per specific
calls, using IP Profiles (IpProfile_SigIPDiffServ) or
Tel Profiles (TelProfile_SigIPDiffServ). For a
detailed description of the parameter and To
configure the feature in the IP Profiles table, see
Configuring IP Profiles or Configuring Tel Profiles.
- 1117 -