AudioCodes E-SBC User Manual

CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Web Parameters
The Web parameters are described in the table below.
Table 68-2: Web Parameters
Parameter Description
'Enable web access from all interfaces'
web-access-from-all-
interfaces
[EnableWebAccessFromAllInterfaces]
Enables Web access from any of the device's IP
network interfaces. The feature applies to HTTP
and HTTPS protocols.
■ [0] = (Default) Disable – Web access is only
through the OAMP interface.
■ [1] = Enable - Web access is through any
network interface.
Note:
■ For the parameter to take effect, a device reset
is required.
■ Instead of using this parameter, you can use the
Additional Management Interfaces table to
assign specific IP network interfaces for
management interfaces (as well as assign them
TLS Contexts). For more information, see
Configuring Additional Management Interfaces.
'Password Change Interval'
[WebUserPassChangeInterval]
Defines the duration (in minutes) of the validity of
Web login passwords. When this duration expires,
the password of the Web user must be changed.
The valid value is 0 to 100000, where 0 means that
the password is always valid. The default is 1140.
Note: The parameter is applicable only when using
the Local Users table, where the default value of the
'Password Age' parameter in the Local Users table
inherits the parameter's value.
'User Inactivity Timer'
[UserInactivityTimer]
Defines the duration (in days) for which a user has
not logged in to the Web interface, after which the
status of the user becomes inactive and can no
longer access the Web interface. These users can
only log in to the Web interface if their status is
changed (to New or Valid) by a Security
Administrator or Master user.
The valid value is 0 to 10000, where 0 means
inactive. The default is 90.
Note: The parameter is applicable only when using
the Local Users table.
'Session Timeout'
[WebSessionTimeout]
Defines the duration (in minutes) of inactivity of a
logged-in user in the Web interface, after which the
user is automatically logged off the Web session. In
other words, the session expires when the user has
not performed any operations (activities) in the Web
interface for the configured duration.
- 1092 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English