AudioCodes E-SBC User Manual

CHAPTER20 SIP Definitions
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
■ srctags
■ http.response.body
■ application/x-www-form-urlencoded (for HTTP Content-Type
header in HTTP requests)
■ true (if the 'Action Type' is set to Exit)
■ false (if the 'Action Type' is set to Exit)
Call Setup Rule Examples
Below are configuration examples for using Call Setup Rules.
■ Example 1: The example configures the device to replace (manipulate) the incoming call's
source number with a number retrieved from the AD by an LDAP query. The device queries the
AD server for the attribute record, "telephoneNumber" whose value is the same as the received
source number (e.g., "telephoneNumber =4064"). If such an Attribute exists, the device
retrieves the number of the attribute record, "alternateNumber" and uses this number as the
source number.
● Call Setup Rules table:
◆ 'Rules Set ID': 1
◆ 'Request Type': LDAP
◆ 'Request Target': LDAP-DC-CORP
◆ 'Request Key': ‘telephoneNumber=’ + param.call.src.user
◆ 'Attributes to Get': alternateNumber
◆ 'Row Role': Use Current Condition
◆ 'Condition': ldap.attr. alternateNumber exists
◆ 'Action Subject': param.call.src.user
◆ 'Action Type': Modify
◆ 'Action Value': ldap.attr. alternateNumber
● IP-to-IP Routing table: A single routing rule is assigned the Call Setup Rule Set ID.
◆ (Index 1) 'Call Setup Rules Set ID': 1
■ Example 2: The example configures the device to replace (manipulate) the incoming call's
calling name (caller ID) with a name retrieved from the AD by an LDAP query. The device
queries the AD server for the attribute record, "telephoneNumber" whose value is the same as
the received source number (e.g., "telephoneNumber =5098"). If such an attribute is found, the
device retrieves the name from the attribute record, "displayName" and uses this as the calling
name in the incoming call.
● Call Setup Rules table:
◆ 'Rules Set ID': 2
◆ 'Request Type': LDAP
◆ 'Request Target': LDAP-DC-CORP
◆ 'Request Key': ‘telephoneNumber=’ + param.call.src.user
◆ 'Attributes to Get': displayName
◆ 'Row Role': Use Current Condition
◆ 'Condition': ldap.attr. displayName exists
◆ 'Action Subject': param.call.src.name
◆ 'Action Type': Modify
- 489 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English