EasyManuals Logo

AudioCodes E-SBC User Manual

AudioCodes E-SBC
1414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1274 background imageLoading...
Page #1274 background image
CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
[DigitPatternForwardOnNoAnswerExt]
'Forward on Do Not Disturb Digit
Pattern (External)'
configure voip > gateway
voice-mail-setting > fwd-
dnd-dig-ptrn-ext
[DigitPatternForwardOnDNDExt]
Defines the digit pattern used by the PBX to
indicate 'call forward on do not disturb' when the
original call is received from an external line (not an
internal extension).
The valid range is a 120-character string.
'Forward on No Reason Digit Pattern
(External)'
configure voip > gateway
voice-mail-setting > fwd-no-
rsn-dig-ptrn-ext
[DigitPatternForwardNoReasonExt]
Defines the digit pattern used by the PBX to
indicate 'call forward with no reason' when the
original call is received from an external line (not an
internal extension).
The valid range is a 120-character string.
'Internal Call Digit Pattern'
configure voip > gateway
voice-mail-setting > int-
call-dig-ptrn
[DigitPatternInternalCall]
Defines the digit pattern used by the PBX to
indicate an internal call.
The valid range is a 120-character string.
'External Call Digit Pattern'
configure voip > gateway
voice-mail-setting > ext-
call-dig-ptrn
[DigitPatternExternalCall]
Defines the digit pattern used by the PBX to
indicate an external call.
The valid range is a 120-character string.
'Disconnect Call Digit Pattern'
configure voip > gateway
voice-mail-setting > disc-
call-dig-ptrn
[TelDisconnectCode]
Defines a digit pattern that when received from the
Tel side, indicates the device to disconnect the call.
The valid range is a 25-character string.
'Digit To Ignore Digit Pattern'
configure voip > gateway
voice-mail-setting > dig-to-
ignore-dig-pattern
[DigitPatternDigitToIgnore]
Defines a digit pattern that if received as Src (S) or
Redirect (R) numbers is ignored and not added to
that number.
The valid range is a 25-character string.
Supplementary Services Parameters
This subsection describes the device's supplementary telephony services parameters.
Caller ID Parameters
The caller ID parameters are described in the table below.
- 1236 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes E-SBC and is the answer not in the manual?

AudioCodes E-SBC Specifications

General IconGeneral
BrandAudioCodes
ModelE-SBC
CategoryGateway
LanguageEnglish

Related product manuals