AudioCodes E-SBC User Manual

CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
configure voip > gateway
dtmf-supp-service supp-
service-settings > mwi-qsig-
party-num
[MWIQsigMsgCentreldIDPartyNumber]
Defines the Message Centred ID party number
used for QSIG MWI messages. If not configured
(default), the parameter is not included in MWI
(activate and deactivate) QSIG messages.
The valid value is a string.
Digit Patterns The following digit pattern parameters apply only to voice mail applications that
use the DTMF communication method. For available pattern syntaxes, refer to the CPE
Configuration Guide for Voice Mail.
'Forward on Busy Digit Pattern
(Internal)'
configure voip > gateway
voice-mail-setting > fwd-
bsy-dig-ptrn-int
[DigitPatternForwardOnBusy]
Defines the digit pattern used by the PBX to
indicate 'call forward on busy' when the original call
is received from an internal extension.
The valid range is a 120-character string.
'Forward on No Answer Digit Pattern
(Internal)'
configure voip > gateway
voice-mail-setting > fwd-no-
ans-dig-pat-int
[DigitPatternForwardOnNoAnswer]
Defines the digit pattern used by the PBX to
indicate 'call forward on no answer' when the
original call is received from an internal extension.
The valid range is a 120-character string.
'Forward on Do Not Disturb Digit
Pattern (Internal)'
configure voip > gateway
voice-mail-setting > fwd-
dnd-dig-ptrn-int
[DigitPatternForwardOnDND]
Defines the digit pattern used by the PBX to
indicate 'call forward on do not disturb' when the
original call is received from an internal extension.
The valid range is a 120-character string.
'Forward on No Reason Digit Pattern
(Internal)'
configure voip > gateway
voice-mail-setting > fwd-no-
rsn-dig-ptrn-int
[DigitPatternForwardNoReason]
Defines the digit pattern used by the PBX to
indicate 'call forward with no reason' when the
original call is received from an internal extension.
The valid range is a 120-character string.
'Forward on Busy Digit Pattern
(External)'
configure voip > gateway
voice-mail-setting > fwd-
bsy-dig-ptrn-ext
[DigitPatternForwardOnBusyExt]
Defines the digit pattern used by the PBX to
indicate 'call forward on busy' when the original call
is received from an external line (not an internal
extension).
The valid range is a 120-character string.
'Forward on No Answer Digit Pattern
(External)'
configure voip > gateway
voice-mail-setting > fwd-no-
ans-dig-pat-ext
Defines the digit pattern used by the PBX to
indicate 'call forward on no answer' when the
original call is received from an external line (not an
internal extension).
The valid range is a 120-character string.
- 1235 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English