CHAPTER55 Viewing PSTN Status
Mediant 1000 Gateway & E-SBC | User's Manual
55 Viewing PSTN Status
This section describes how to view PSTN-related status.
Viewing Trunks & Channels Status
You can view the status of the device's PSTN trunks and corresponding channels in the Web
interface. It also enables you to view trunk configuration and channel information.
➢ To view trunk and channel status:
1. Open the Trunks & Channels Status page, by doing one of the following:
● Navigation tree: Monitor menu > Monitor tab > PSTN Status folder > Trunks &
Channels Status.
● Monitor home page:
i. Open the Monitor home page (see Viewing Device Status on Monitor Page).
ii. On the graphical display of the device, click a PSTN port; a shortcut menu appears.
iii. From the shortcut menu, choose Port Status:
The number of displayed trunks and channels depends on configuration.
The status of the trunks is depicted by color-coded icons, as described in the table below:
Table 55-1: Description of Color-Coded Icons for Trunk Status
Icon Color
Trunk
Label
Gray Disabled
Green Active - OK
Yellow RAI Alarm
Red LOS / LOF Alarm
Blue AIS Alarm
Light Orange D-Channel Alarm
Dark Orange NFAS Alarm
Purple Lower Layer Down (DS3 physical layer is disabled)
The status of the channels is depicted by color-coded icons, as described in the table below:
- 960 -
To Next Page
Loading...
Need help?
General
