EasyManuals Logo

AudioCodes E-SBC User Manual

AudioCodes E-SBC
1414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1143 background imageLoading...
Page #1143 background image
CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
[SerialBaudRate] Defines the serial communication baud rate.
The valid values include the following: 1200, 2400, 9600, 14400, 19200,
38400, 57600, or 115200 (default).
Note: For the parameter to take effect, a device reset is required.
[SerialData] Defines the serial communication data bit.
â–  [7] = 7-bit
â–  [8] = (Default) 8-bit
Note: For the parameter to take effect, a device reset is required.
[SerialParity] Defines the serial communication polarity.
â–  [0] = (Default) None
â–  [1] = Odd
â–  [2] = Even
Note: For the parameter to take effect, a device reset is required.
[SerialStop] Defines the serial communication stop bit.
â–  [1] = (Default) 1-bit (default)
â–  [2] = 2-bit
Note: For the parameter to take effect, a device reset is required.
[SerialFlowControl] Defines the serial communication flow control.
â–  [0] = (Default) None
â–  [1] = Hardware
Note: For the parameter to take effect, a device reset is required.
Auxiliary and Configuration File Name Parameters
The table below lists the parameters associated with the Auxiliary files. For more information on
Auxiliary files, see Loading Auxiliary Files.
Table 68-7: Auxiliary and Configuration File Parameters
Parameter Description
General Parameters
[SetDefaultOnIniFileProcess] Determines if all the device's parameters are set to their
defaults before processing the updated ini file.
â–  [0] = Disable - parameters not included in the downloaded
ini file are not returned to default settings (i.e., retain their
current settings).
â–  [1] = Enable (default).
Note: The parameter is applicable only for automatic HTTP
update or Web ini file upload (not applicable if the ini file is
loaded using BootP).
[SaveConfiguration] Determines if the device's configuration (parameters and
files) is saved to flash (non-volatile memory).
â–  [0] = Configuration isn't saved to flash memory.
- 1105 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes E-SBC and is the answer not in the manual?

AudioCodes E-SBC Specifications

General IconGeneral
BrandAudioCodes
ModelE-SBC
CategoryGateway
LanguageEnglish

Related product manuals