AudioCodes E-SBC User Manual

CHAPTER47 Automatic Provisioning
Mediant 1000 Gateway & E-SBC | User's Manual
[ InterfaceTable ]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes, InterfaceTable_
InterfaceMode, InterfaceTable_IPAddress, InterfaceTable_PrefixLength,
InterfaceTable_Gateway, InterfaceTable_VlanID, InterfaceTable_InterfaceName,
InterfaceTable_PrimaryDNSServerIPAddress, InterfaceTable_
SecondaryDNSServerIPAddress, InterfaceTable_UnderlyingDevice;
InterfaceTable 0 = 6, 10, 10.15.7.95, 16, 10.15.0.1, 1, "Voice", 80.179.52.100,
0.0.0.0, "vlan 1";
[ \InterfaceTable ]
5. Configure the device to perform the Automatic Update process daily at 03:00 (3 a.m):
● ini File:
AutoUpdatePredefinedTime = '03:00'
● CLI:
# configure system
(config-system)# automatic update
(automatic-update)# predefined-time 03:00
Automatic Update for Mass Deployment
This example describes how to configure the Automatic Update feature for updating multiple
devices (i.e., mass deployment) using an HTTP provisioning server. In this example, all the
devices are configured to download the same "master" configuration file. This file serves as the
configuration template and instructs the devices which files to download and how often to perform
the Automatic Update process. In addition, the master file also instructs each device to download
an ini configuration file whose file name contains the MAC address of the device.
The example scenario is as follows:
■ All devices download a "master" configuration file that contains the following:
● Common configuration shared by all device's.
● MAC Address Placeholder in Configuration File Name.
■ Device queries the provisioning server daily at 24:00 (midnight) for software, configuration and
Auxiliary files.
■ HTTP-based provisioning server at www.company.com for storing the files.
■ DNS server at 80.179.52.100 for resolving the domain name of the provisioning server.
➢ To set up automatic provisioning for mass provisioning (example):
1. Create a "master" configuration file template named "master_configuration.ini" or "master_
startup.txt" with the following settings:
● Common configuration for all devices:
◆ ini file:
AutoUpdatePredefinedTime = '24:00'
CptFileURL = 'https://www.company.com/call_progress.dat'
AutoCmpFileUrl = 'https://www.company.com/sw.cmp'
◆ CLI:
- 905 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English