AudioCodes E-SBC - Page 942

CHAPTER47 Automatic Provisioning
Mediant 1000 Gateway & E-SBC | User's Manual
■ DNS server at 80.179.52.100 for resolving the domain names of the provisioning servers
(FTPS and HTTP).
➢ To set up Automatic Provisioning for files stored on different server types (example):
1. CPT file:
a. Set up an NFS server and copy the CPT file to the directory /usr/shared/public on the NFS
server.
b. Configure the device with the NFS server:
[ NFSServers ]
FORMAT NFSServers_Index = NFSServers_HostOrIP, NFSServers_RootPath,
NFSServers_NfsVersion, NFSServers_AuthType, NFSServers_UID,
NFSServers_GID, NFSServers_VlanType;
NFSServers 0 = "10.31.2.10", "/usr/share/public/", 2, 1, 0, 1, 1;
[ \NFSServers ]
c. Configure the device with the URL path of the CPT file:
◆ ini File:
CptFileURL = 'file://10.31.2.10/usr/share/public/usa_tones.dat'
2. License Key file:
a. Set up an FTPS server and copy the License Key file to the server.
b. Configure the device with the URL path of the License Key file:
◆ ini File:
FeatureKeyURL = 'ftps://root:wheel@ftpserver.corp.com/license_key.txt'
◆ CLI:
# configure system
(config-system)# automatic update
(automatic-update)# feature-key
'ftps://root:wheel@ftpserver.corp.com/license_key.txt'
3. Software (.cmp) and ini files:
a. Set up an HTTP Web server and copy the .cmp and configuration files to the server.
b. Configure the device with the URL paths of the .cmp and ini files:
◆ ini File:
AutoCmpFileUrl = 'http://www.company.com/device/sw.cmp'
IniFileURL = 'http://www.company.com/device/inifile.ini'
◆ CLI:
# configure system
(config-system)# automatic update
(automatic-update)# auto-firmware 'http://www.company.com/sw.cmp'
(automatic-update)# startup-script https://company.com/files/startup_script.txt
4. Configure the device with the IP address of the DNS server for resolving the domain names of
the FTPS and HTTP servers:
- 904 -