AudioCodes E-SBC User Manual

CHAPTER6 Web-Based Management
Mediant 1000 Gateway & E-SBC | User's Manual
If you have never configured the WebLogoText parameter, you can omit it from the ini
file. If you have configured it before, then set it to an empty value, as shown above.
2. Load the ini file using the Auxiliary Files page (see Loading Auxiliary Files).
3. Reset the device with a save-to-flash for your settings to take effect.
➢ To customize the text of the browser tab label:
1. Create an ini file that includes the following parameter settings:
● To replace the default text:
UseWebLogo = 1
WebLogoText = <your text, for example, Hello>
● To restore the default text ("AudioCodes"):
UseWebLogo = 0
2. Load the ini file using the Auxiliary Files page (see Loading Auxiliary Files).
3. Reset the device with a save-to-flash for your settings to take effect.
Customizing the Product Name
You can customize the device's product name. The name is displayed in various places in the
management interfaces, as shown below using the customized name, "Product":
■ Web Login screen and tab bar:
■ ini file "Board" field:
;Board: Product
■ CLI prompt:
Product(config-system)#
➢ To customize the device's product name:
1. Create an ini file (*.ini) that includes the following parameter settings:
- 38 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English