AudioCodes E-SBC User Manual

CHAPTER16 Services
Mediant 1000 Gateway & E-SBC | User's Manual
2. In the 'Primary DNS Server IP' field, enter the IP address of your main DNS server.
3. (Optional) In the 'Secondary DNS Server IP' field, enter the IP address of the secondary DNS
server.
4. Click Apply.
Configuring HTTP Proxy Servers
The HTTP Proxy Servers table lets you configure up to 10 HTTP Proxy servers. Once configured,
you can configure HTTP Locations for the HTTP Proxy Server (see Configuring HTTP Locations on
page262).
The following procedure describes how to configure HTTP Proxy Servers through the Web
interface. You can also configure it through ini file [HTTPServer] or CLI (configure network >
http-proxy > http-server).
➢ To configure an HTTP Proxy Server:
1. Open the HTTP Proxy Server table (Setup menu > IP Network tab > HTTP Proxy folder >
HTTP Proxy Servers).
2. Click New; the following dialog box appears:
3. Configure an HTTP Proxy server according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Table 16-20:HTTP Proxy Servers Table Parameter Descriptions
Parameter Description
'Index' Defines an index number for the new table row.
- 260 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English