AudioCodes E-SBC User Manual

CHAPTER26 Manipulation
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
'Stripped Digits From Left'
remove-from-left
[_RemoveFromLeft]
Defines the number of digits to remove from the left of the
redirect number prefix.
For example, if you enter 3 and the redirect number is 5551234,
the new number is 1234.
'Stripped Digits From
Right'
remove-from-right
[_RemoveFromRight]
Defines the number of digits to remove from the right of the
redirect number prefix.
For example, if you enter 3 and the redirect number is 5551234,
the new number is 5551.
'Number of Digits to
Leave'
num-of-digits-to-
leave
[_LeaveFromRight]
Defines the number of digits that you want to retain from the right
of the redirect number.
'Prefix to Add'
prefix-to-add
[_Prefix2Add]
Defines the number or string that you want added to the front of
the redirect number.
For example, if you enter 9 and the redirect number is 1234, the
new number is 91234.
'Suffix to Add'
suffix-to-add
[_Suffix2Add]
Defines the number or string that you want added to the end of
the redirect number.
For example, if you enter 00 and the redirect number is 1234, the
new number is 123400.
'TON'
ton
[_NumberType]
Defines the Type of Number (TON).
■ [-1] = (Default) Not configured
■ [0] Unknown (default)
■ [1] International-Level2 Regional
■ [2] National-Level1 Regional
■ [3] Network-PSTN Specific
■ [4] Subscriber-Level0 Regional
■ [6] Abbreviated
The applicable values depend on the NPI value:
■ If NPI is set to Unknown, you can set TON to Unknown.
■ If NPI is set to Private, you can set TON to one of the
following:
✔ Unknown
✔ International-Level2 Regional
✔ National-Level1 Regional
✔ Network-PSTN Specific
✔ Subscriber-Level0 Regional
■ If NPI is set to E.164 Public, you can set TON to one of the
following:
✔ Unknown
✔ International-Level2 Regional
✔ National-Level1 Regional
- 626 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English