AudioCodes E-SBC - Page 1026

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
Destination
Username
Before
Manipulation
[811]
Displays the original destination username (before manipulation, if any).
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format tables.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The maximum number of characters for Syslog tabular alignment is 20.
Destination
Username
[809]
Displays the destination username (after manipulation, if any).
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format tables.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The maximum number of characters for Syslog tabular alignment is 20.
Direct Media
[807]
Displays whether the call session flowed directly between the endpoints (i.e.,
Direct Media). The field is a string:
■ "yes": The call is a direct media call session.
■ "no": The call traversed the device.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The default field title is "DirectMedia".
■ The maximum number of characters for Syslog tabular alignment is 11.
Endpoint
Type
[400]
Displays the endpoint type. The field is a string:
■ "NONE"
■ "FXO"
■ "FXS"
■ "ISDN"
■ "CAS"
■ "TRANSPARNT" (E1/T1 calls without D-channel / signaling)
■ "SBC" (SBC calls)
■ "TEST" (for Test Call calls)
■ "3WCONF" (three-way conferencing calls)
■ "SIPREC" (SIPRec calls)
■ "MOH" (Music-on-Hold calls)
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "EPTyp".
■ The maximum number of characters for Syslog tabular alignment is 10.
- 988 -