AudioCodes E-SBC - Page 1028

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
■ The default field title is "IPG (name)" for Gateway Syslog and Local
Storage, "IPGroup (name)" for SBC Syslog and Local Storage, and "IP
Group" in the Web SBC CDR History table.
■ The maximum number of characters for Syslog tabular alignment is 32.
IP Profile ID
[425]
Displays the IP Profile ID. The field is an integer.
Note:
■ The field is optional and can be included in the CDR using the SBC CDR
Format and Gateway CDR Format tables.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 5.
IP Profile
Name
[426]
Displays the IP Profile name. The field is a string of up to 40 characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "IpProfileId (name)".
■ The maximum number of characters for Syslog tabular alignment is 32.
ISDN Line
Type
[525]
Displays the ISDN line type. The field is an integer:
■ "10": E1
■ "11": T1
■ "12": BRI
■ "21": Unknown
Note:
■ The field is optional and can be included in the CDR using the Gateway
CDR Format tables.
■ The field is applicable to all CDR Report Types.
■ The field is applicable only to Gateway CDRs.
■ The maximum number of characters for Syslog tabular alignment is 5.
Latched
RTP IP
[631]
Displays the remote IP address of the incoming RTP stream that the device
"latched" onto as a result of the RTP latching mechanism for NAT traversal.
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC media and Gateway CDRs.
■ The default field title is "LatchedRtpIp".
■ The maximum number of characters for Syslog tabular alignment is 20.
Latched
RTP Port
[632]
Displays the remote RTP port of the incoming RTP stream that the device
"latched" onto as a result of the RTP latching mechanism for NAT traversal.
The field is an integer 0 to 0xFFFF.
Note:
■ The field is included in the default CDR.
- 990 -