AudioCodes E-SBC - Page 1036

CHAPTER57 Reporting Information to External Party
Mediant 1000 Gateway & E-SBC | User's Manual
Field Description
■ "9": DTE out of order
■ "10": Call forwarding DTE
■ "13": Call transfer
■ "14": Call pickup
■ "15": Call systematic or call forward unconditional (CFU)
Note:
■ The field is included in the default CDR.
■ The field is applicable only to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "RedirectReason".
■ The maximum number of characters for Syslog tabular alignment is 15.
Redirect
URI Before
Manipulation
[805]
Displays the original call redirect URI (username@host) before manipulation, if
any. The field is a string of up to 150 characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The default field title is "RedirectURINumBeforeMap".
■ The maximum number of characters for Syslog tabular alignment is 41.
Redirect
URI
[804]
Displays the original call redirect URI (username@host) after manipulation, if
any. The field value is a string of up to 150 characters.
Note:
■ The field is included in the default CDR.
■ The field is applicable to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling CDRs.
■ The default field title is "RedirectURINum".
■ The maximum number of characters for Syslog tabular alignment is 41.
Release
Time
[413]
Displays the date and time the call ended (disconnected). The field is a string of
up to 35 characters and presented in the following format: <hh:mm:ss:ms>
UTC <DDD> <MMM> <DD> <YYYY>. For example, "17:00:55.002 UTC Thu
Dec 14 2017".
Note:
■ To configure the time zone string (e.g., "UTC" - default, "GMT+1" and
"EST"), use the TimeZoneFormat parameter.
■ The field is included in the default CDR.
■ The field is applicable to "CALL_END" CDR Report Types.
■ The field is applicable only to SBC signaling and Gateway CDRs.
■ The default field title is "ReleaseTime" for Syslog, "h323-disconnect-time="
for RADIUS, and "Call End Time" in the Web SBC CDR History and Web
Gateway CDR History tables.
■ The maximum number of characters for Syslog tabular alignment is 35.
Remote
Input Octets
Displays the remote input octets (bytes).
- 998 -