AudioCodes E-SBC - Page 107

CHAPTER8 SNMP-Based Management
Mediant 1000 Gateway & E-SBC | User's Manual
3. Configure the SNMP V3 parameters according to the table below.
4. Click Apply, and then reset the device with a save-to-flash for your settings to take effect.
Table 8-3: SNMPv3 Users Table Parameters Description
Parameter Description
'Index'
[SNMPUsers_
Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
'User Name'
username
[SNMPUsers_
Username]
Name of the SNMP v3 user. The name must be unique.
'Authentication
Protocol'
auth-
protocol
[SNMPUsers_
AuthProtocol]
Authentication protocol of the SNMP v3 user.
■ [0] None (default)
■ [1] MD5
■ [2] SHA-1
'Privacy
Protocol'
priv-
protocol
[SNMPUsers_
PrivProtocol]
Privacy protocol of the SNMP v3 user.
■ [0] None (default)
■ [1] DES
■ [2] 3DES
■ [3] AES-128
'Authentication
Key'
auth-key
[SNMPUsers_
AuthKey]
Authentication key. Keys can be entered in the form of a text password or
long hex string. Keys are always persisted as long hex strings and keys are
localized.
- 69 -