EasyManuals Logo

AudioCodes E-SBC User Manual

AudioCodes E-SBC
1414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1161 background imageLoading...
Page #1161 background image
CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
'NTP Authentication Key
Identifier'
auth-key-id
[NtpAuthKeyId]
Defines the NTP authentication key identifier for
authenticating NTP messages. The identifier must match the
value configured on the NTP server. The NTP server may
have several keys configured for different clients; this
number identifies which key is used.
The valid value is 1 to 65535. The default is 0 (i.e., no
authentication is done).
'NTP Authentication Secret
Key'
auth-key-md5
[ntpAuthMd5KeyPassword]
Defines the secret authentication key shared between the
device (client) and the NTP server for authenticating NTP
messages.
The valid value is a string of up to 32 characters. By default,
no key is defined.
Regional Clock and Daylight Saving Time Parameters
'UTC Offset'
configure system >
clock > utc-offset
[NTPServerUTCOffset]
Defines the Universal Time Coordinate (UTC) offset (in
seconds) from the local time.
The valid range is -86400 seconds (i.e., -24 hours) to +86400
seconds (i.e., +24 hours). The default is 0.
Note: The offset setting is applied only on the hour. For
example, if you configure the parameter at 15:42, the device
applies the setting only at 16:00.
'Daylight Saving Time'
configure system >
clock > summer-time >
summer-time
[DayLightSavingTimeEnable]
Enables daylight saving time (DST).
â–  [0] Disable (default)
â–  [1] Enable
'Start Time / Day of Month
Start'
configure system >
clock > summer-time >
start
[DayLightSavingTimeStart]
Defines the date and time when DST begins. This value can
be configured using any of the following formats:
â–  Day of year - mm:dd:hh:mm, where:
✔ mm denotes month
✔ dd denotes date of the month
✔ hh denotes hour
✔ mm denotes minutes
For example, "05:01:08:00" denotes daylight saving start-
ing from May 1 at 8 A.M.
â–  Day of month - mm:day/wk:hh:mm, where:
✔ mm denotes month (e.g., 04)
✔ day denotes day of week (e.g., FRI)
✔ wk denotes week of the month (e.g., 03)
✔ hh denotes hour (e.g., 23)
✔ mm denotes minutes (e.g., 10)
- 1123 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes E-SBC and is the answer not in the manual?

AudioCodes E-SBC Specifications

General IconGeneral
BrandAudioCodes
ModelE-SBC
CategoryGateway
LanguageEnglish

Related product manuals