AudioCodes E-SBC User Manual

CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
subscriber 23 n/a II-1
cellular 61 II-13 n/a
locutorio n/a II-11 n/a
servicio-publico n/a II-12 n/a
red-privada-virtual /
private-virtual-network
n/a II-14 n/a
linea-especial / special-
operator-handling-
required
n/a II-15 n/a
operadora-con-inter-
vencion / telco-operator-
handled-call
n/a II-5 n/a
prison 29 n/a n/a
hotel 66 n/a n/a
cellular-roaming 63 n/a n/a
Note: This feature is applicable only to the NI-2 PRI and E1
MFC-R2 variants.
'Calling Party Category
Mode'
cpc-mode
[CallingPartyCategoryMod
e]
Defines the regional Calling Party Category (CPC) mapping
variant between SIP and PSTN for MFC-R2.
■ [0] None (default)
■ [1] Brazil R2
■ [2] Argentina R2
Note:
■ To enable CPC mapping, set the
EnableCallingPartyCategory parameter to 1.
■ The parameter is applicable only to the E1 MFC-R2 variant.
usr2usr-hdr-frmt
[UserToUserHeaderForma
t]
Defines the interworking between the SIP INVITE's User-to-
User header and the ISDN User-to-User (UU) IE data.
■ [0] = (Default) SIP header format: X-UserToUser.
■ [1] = SIP header format: User-to-User with Protocol
Discriminator (pd) attribute (according to IETF Internet-Draft
draft-johnston-sipping-cc-uui-04). For example:
User-to-
User=3030373435313734313635353b313233343b3834
;pd=4
■ [2] = SIP header format: User-to-User with encoding=hex at
the end and pd embedded as the first byte (according to
IETF Internet-Draft draft-johnston-sipping-cc-uui-03). For
example:
- 1284 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English